Modulift Beams Lower Vessel Into Water for Maiden Voyage
UK-based Osprey Ltd., a specialist in the onshore and offshore transportation and lifting of heavy or abnormal loads, lifted a 72.5t catamaran using a 1,000t capacity Liebherr mobile crane and a one-over-two Modulift spreader beam configuration beneath its hook. The rigging gear was sourced from FLG Services, the specialist lifting division of A-Plant.
Osprey accepted a scope of work from shipbuilder Wight Shipyard to move the vessel from the shed where it was built to the water at Venture Quays, Cowes on the Isle of Wight, before a course was set for its final destination in Austria. The 250-passenger Twin City Liner is 39.7m long, 11.1m wide, and 6.8m high.
The first challenge was removing the vessel, which is due to arrive in Vienna in time for the start of the new season at the end of March 2019 from its building. Osprey selected two, six-axle Goldhofer self-propelled modular transporters (SPMT) to work in tandem to move the load to within the reach of the Liebherr LTM1800D. The crane was complete with a 36m high rig, designed to accommodate a 3.7m centre of gravity offset and different elevations of the boat's lifting eyes. A Modulift MOD400 was used at a 29m span beneath 29m long and 26.4m long top slings to balance the lift. Two MOD70H beams were used underneath, one at 5.5m long and the other at 4m. Again, two different lengths of sling were used to connect them to the top beam—3m at the stern (back) and 3.9m at the bow (front). The slings that met the lifting eyes at the bottom of the rig were all 4m in length.
Danny Skidmore, heavy cranes manager at Osprey, said: "We had to work closely with shipbuilders and naval architects, and refer to CAD [computer-aided design], to devise a method of lifting the catamaran safely and completely level. The previous time we lifted such a vessel, we used two cranes in tandem, but mobilising two cranes of that size represents a large-scale operation and high costs, not to mention the disruption it has on the shipyard. We wanted to come up with a way to minimise mobilisation and limit the impact on our client's busy, marine environment."
Osprey consulted Modulift and FLG Services, principally on utilisation of the MOD400 at 29m, which usually has a maximum span of 24m. Sue Spencer, technical director at Modulift, said: "It was more cost effective and convenient for Osprey to source the beam from a rental partner versus a custom designed product. Our technical team looked into the feasibility, and came up with a solution whereby a central support sling system would be required to support the self-weight of the main spreader beam to minimise any potential deflection—and this adjustable sling system would need to be attached vertically to the crane hook."
She added: "We devised a design whereby the tension load in the central sling could be monitored using a wireless load link to ensure that the sling was carrying the correct share of the self-weight of the beam throughout the lift, with the means to adjust the tension by way of a chain block. The customer monitored the tension throughout the lift to ensure that it did not go outside specified parameters. We attended the lift on an advisory basis to make sure everything went smoothly. We have not undertaken this type of rig before, and now we will be able to market our MOD250s and 400s at longer spans with a central support." Shaun Sullivan of FLG Services, said "Working collaboratively on this project was vital, by combining our expertise with Modulift we were able to deliver a solution to Osprey which allowed us to lift to a length outside the specified capabilities of the beam."
Skidmore concluded: "I was very impressed with the support provided by Modulift and FLG Services. They know the industry and get what we do. The positive, 'can-do' attitude will always go a long way with me.."